智能汽车专业校企合作模式及人才培养方式的探究

智能汽车已经成为未来汽车领域的发展方向,且高校逐渐与企业合作,建立智能汽车人才培养模式。但是现阶段,校企合作深度以及人才培养方式仍然存在一定的不足,不利于为智能汽车领域输送更多的人才。基于此,本文主要探究智能汽车专业校企合作模式以及人才培养模式,详细阐述智能汽车专业校企合作模式及人才培养模式中存在的问题,进而提出针对性的建议。     

西韩城际铁路湿陷性黄土地层现场浸水试验研究

在分析西韩城际铁路沿线黄土分布特征的基础上,选取代表性场地开展现场试坑浸水试验。试验结果表明:场地实测最大自重湿陷量为46 mm,仅为室内压缩试验计算值的0.23倍;湿陷土层厚度15 m,除Q;黄土全部具有湿陷性外,Q;上部黄土亦具有湿陷性;地表水自然入渗深度超过50 m,浸润角约为40°,浸润范围约为浸水试坑直径的1.7倍。对现场实测值和室内计算值差异原因进行深入分析,得出在黄土结构未完全破坏之前,发生过湿陷的土体在特定条件下还有可能再次湿陷的结论。     

广州地铁某型车转向架轴箱进水原因分析及解决措施

转向架轴箱轴承作为列车传动系统中的重要部件,其运行状态直接影响列车的运行安全。介绍了广州地铁某型车转向架轴箱轴承及接地装置多次出现进水导致轴承失效的情况,并深入分析得出轴箱进水的两个原因:轴箱端盖部件倒角尺寸异常,进口和国产的轴箱、接地装置间存在尺寸差异。提出了对轴箱端盖进行普查、更换、统型等解决措施。     

泰国三机场高铁列控系统方案研究

对泰国三机场高铁项目的列控系统选择要求进行分析,提出列控系统方案并进行综合比选,最后提出泰国三机场高铁项目的列控系统推荐方案,研究成果可以为海外项目列控系统方案选择提供一定的参考。     

新型明桥面轨枕板式无砟轨道结构参数研究

钢桁梁桥由于其承载性能好和跨越能力较强等优点,在大跨度铁路桥梁中被广泛采用。但大跨度钢桁梁桥具有跨中挠度大、梁端转角大和温度变形敏感等特点,为了减小大跨度钢桁梁桥二期恒载、适应桥梁变形特性,在大跨度钢桁梁桥上采用新型明桥面轨枕板式无砟轨道结构。以南沙港铁路某大跨度钢桁梁桥铺设新型明桥面轨枕板式轨道为背景,采用有限元法建立大跨度钢桁梁桥上轨枕板式无砟轨道结构计算模型,研究了轨枕板结构参数对轨道受力与变形的影响,确定轨道结构的合理尺寸与参数。结果表明:轨枕板的外形尺寸直接影响其受力和变形特征;板下垫层的厚度对垫层的受力特性的影响较大;建议南沙港铁路某大跨度钢桁梁桥上采用具有2组承轨台、宽度为2800 mm的轨枕板,轨枕板厚度为280 mm,板下垫层厚度为120 mm。     

基于随机森林结合前向序列选择算法的铁路隧道防水板检测数据关键影响因素识别北大核心

针对参数特征复杂度高的铁路产品,提出了一种基于随机森林(RF)结合前向序列选择(SFS)算法的铁路产品检验检测数据关键影响因素识别方法,以辅助基于经验的识别方法。创新使用RF-SFS算法,将其应用于铁路隧道防水板检验检测数据关键影响因素的识别研究。根据多年铁路隧道防水板检测数据,建立RF模型,获得了影响铁路隧道防水板检测结果的特征关键性评分序列。随后,结合SFS方法得出关键性评分序列的阈值,将排名前6位的影响因素识别为关键特征,模型的预测能力达到99.98%。为验证关键特征识别方法的有效性,对比分析3种模型在使用不同特征子集时的预测能力。当仅选用关键特征时,3种模型的预测能力均达到最佳,加入冗余特征后模型的预测能力逐渐降低。     

ROV attitude control based on multi-motor cooperative propulsion北大核心CSCD

[目的]为了提高遥控水下航行器(ROV)在复杂水下环境中的姿态控制性能,开展多电机协同推进的ROV姿态控制研究。[方法]首先,针对多电机系统的结构和算法,分别提出一种基于PID速度补偿器的偏差耦合结构和一种新型非奇异终端滑模控制(SMC)算法,并设计一种新颖的基于多电机协同推进的ROV姿态控制方法;然后,建立ROV的运动学和动力学模型,开展推进器组推力建模分析、解耦简化ROV动力学模型研究;最后,设计一种ROV滑模姿态控制器。[结果]仿真结果表明,所提的结构和算法可提高多电机系统的抗干扰性、同步性和快速响应能力,进而提高ROV姿态控制系统的稳定性与鲁棒性。[结论]所提方法可为ROV姿态控制提供一种新的可用方案。     

高速铁路枢纽站技术作业计划与动车所调车作业计划协同编制研究

分析高速铁路枢纽站技术作业计划与动车所调车作业计划的协同编制过程,提出了将两个计划一体化编制的思想。以需安排作业效益最大化为优化目标,构建基于动车组车底的高速铁路枢纽站与动车所作业计划协同编制模型。针对模型特点,提出瓶颈工序、启发式分配规则及粗粒度主从进程模式的并行禁忌搜索策略(PTS)相结合的混合优化算法,首先确定作业安排瓶颈工序,然后启动主进程和若干从进程,主进程运用启发式分配规则快速生成初始解分配给从进程,从进程运用与瓶颈工序相关的禁忌算法搜索优化解,并反馈给主进程,主进程记录全局最优解并根据交叉策略生成新的初始解,重新分配给从进程进行TS搜索。最后,用实例验证了模型和算法的有效性。     

基于网络测度的宝鸡至汉中铁路功能定位研究

针对铁路规划项目功能定位定性分析为主的客观性不足问题,以宝鸡至汉中铁路为研究对象,选取节点间旅客交流时间或节点间运输距离为权重,运用Space L构造法建立区域铁路客、货运输网络拓扑结构模型;采用复杂网络分析方法,基于"有无对比"思想及等级化线路技术标准,结合应用Pajek软件与R软件,测算区域铁路运输网络直径、平均距离、边介数、网络效率等加权特征参数,以及非加权特征参数集聚系数进行网络测度分析,并进行网络最小生成树分析;以网络分析结果为基础,从路网、通道、客运、货运四个方面对铁路规划项目功能进行定量化综合定位,宝汉铁路为宁陕及陇东地区与川渝地区间南北纵向新通道的骨架干线,是一条以货为主、客货共线的区域路网干线铁路。     

Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.